Magnetic drive pumps:

Withstands difficult operating conditions and offers high efficiency

Process magnetic drive pumps MX, MX-F series

MX Catalog for Europe    MX-F Catalog for Europe
MX Catalog for Asia    MX-F Catalog for Asia

Magnetic Pumps
 Self-radiating structure (International patent applied)
Through heat-dispersion holes provided in the fixed portions of the impeller and the magnet capsule, the liquid around the spindle and the bearing is forced to circulate so that heat generated by sliding can be reduced effectively. Thus, thermal deformation and melt are prevented.

Non-contact structure
By installing the driving magnet and the driven magnet in an inventive way, the movement of the magnet capsule is controlled by magnetic force to prevent the rear thrust and the rear portion of the bearing coming into contact with each other continuously even during dry running. This structure reduces heat generation and secures lubricant routes. (Except MX-70, 100)


Volute casing divided into two sections (International patent applied)
The MX series is the first resin magnet pump which uses the pump casing divided into the front casing and the rear casing to form a vortex chamber as an ideal form. Therefore, the internal leak phenomenon, which means that the liquid getting out of the impeller returns to the pump casing and is suppressed to a minimum and the liquid is efficiently guided to the discharge port to enhance overall efficiency.

Robust structure
All stress bearing portions, such as the front and rear casings, are reinforced by means of ribs to improve the pressure resistance and the mechanical strength of the pump. The bearing is not only fixed by conventional press fit but is also sandwiched between the abutting portion in the depth of the magnet capsule and the rear end of the impeller to improve its reliability under high temperature. (Except MX-70, 100)

Specifications (50/60Hz)

Max. discharge capacity 500 L/min
Max. head 35/37 m
Main materials MX: GFRPP, MX-F: CFRETFE
Required power range 0.15 to 2.2 kW
Discharge bore G1 to 40 mm
Liquid temp. range 0 to 80 C deg. (10 to 80 C deg. for Aflas® O ring.)
Specific gravity limit Up to approx. 1.2 (Please contact us for details.)
Sealing method Seal-less construction

 

Other Magnetic Drive Pumps :

magnetic drive pumps

Process pumps

Self-priming pumps

Small size pumps

Direct drive pumps
MDE series
MDM series
MXM series
MDF-L series
AMP series
MX, MX-F series
MDH, MDH-F series 		SMX, SMX-F series MD series
MD-F series 		RD series