Magnetic drive pumps:

Polypropylene magnetic drive process pumps

Process magnetic drive pumps AMP series

   Catalog for Asia

Polypropylene magnetic drive process pumps
 Highly durable structure
A ductile cast iron shell adds strength and durability to the polypropylene wet ends. The rear casing which is subject to the highest stress, is reinforced with an FRP cover to increase strength. The maximum allowable casing pressure of 1.0MPa is a highlight feature amongst polypropylene pumps.

Unique design prevents abnormal operation
The pump design features a Non contact system. The pump exhibits outstanding durability in air ingress to the suction. Note: Dry running is not permitted.


Back pullout system
The back pullout system allows easy maintenance and inspection without removing piping. The motor can be safely removed without chemical leakage (Pumps on base plates only).

Modular design and low maintenance cost
The pump is a modular design for ease of maintenance. Specific adjustments such as centering or checking clearances are not required. Any wear part can simply be replaced individually and reduces maintenance costs.

Specifications (50/60Hz)

Max. discharge capacity 1000 L/min
Max. head 36/49 m
Main materials CFRPP
Required power range 3.7 to 7.5 kW
Suction X Discharge 50 X 40 mm (40-1), 65 X 50mm (50-1)
Liquid temp. range 0 to 80 C deg.
Sealing method Seal-less construction

 

Other Magnetic Drive Pumps :

magnetic drive pumps

Process pumps

Self-priming pumps

Small size pumps

Direct drive pumps
MDE series
MDM series
MXM series
MDF-L series
AMP series
MX, MX-F series
MDH, MDH-F series 		SMX, SMX-F series MD series
MD-F series 		RD series