Product Detail:

automatic magnetic door gasket trimming machine

Descriptions of automatic drilling, cutting:

It is the main working unit for pvc door gasket, controlled by screen touching mode, and the parameters could be freely setup, which make the operation easily, the door gasket draught by traction engine are draught and drilling mold, and draught onto the accessorial engine of trimming machine, at thim moment, please control the inserting speed by manual switch of “manual/auto” on electronic control case, after having inserted the gasket into cut mold exactly, please switchover to auto switch, at the same time, the touching-mode screen should switchover to “auto. Run”, the double angle trimming machine cut the two ends of gasket to 45 degree according to the set length value, the cut speed would be adjusted according to the draught speed, which is controlled by the “Frequency Change” button, and tightness of gaskets are controlled by the photoelectricity switch on the back of the drilling machine, after having been cut, the gaskets are draught onto the material putting plate.

Photos of Auto. Trimming Machine System incl. 3 parts:

Pic.1: Trimming Machine
automatic magnetic door gasket trimming machine
Pic 2: Electronic Control Case
Electronic Control Case
Pic3:Cutting Machine
pvc door gasket Holes Drilling Machine

Main Components:

No.

Item

Memo

1

Reduction Box

NEUGART

2

Pneumatic Parts

AIRTAC

3

Blades

IMPORTED MATERIAL

4

Servo System

OMRON

5

Electronic Control Case

Touching Screen Mode

6

Cut Mold

2Cr13