Magnetic drive pumps:

Magnetic drive processing pump with dry running capability

Process magnetic drive pumps MDM series

Catalog for Europe   Catalog for Asia

Process magnetic drive pumps MDM series
 Unique design endurable to dry running(Non contact system)
The pump design features a mechanism to withstand dry running. High magnet power of the rare earth magnets prevents the magnet capsule coming into contact with the thrust ring of the rear casing, thus preventing melting of fluororesin components due to heat generation. This greatly improves resistance against dry running in comparison with conventional magnetic drive pumps made of fluororesin. Note: Only CF type (fitted with high density carbon bearing) can cope with dry running. Dry running is not permitted in the case of KK type.

ETFE and PFA available in standard models
Carbon fibre reinforced ETFE (CFRETFE) and PFA linings can be supplied to meet many varying duties. PFA being a natural unfilled material generates fewer contaminants and makes it ideally suited for transfer of high purity chemicals.

Back pullout system
In order to facilitate inspection and maintenance, this series employs the back pullout system. This enables one to conduct inspections internally and replace parts without removing piping. The pump is designed to include safety measures that can prevent the liquid from leaking when the foot support is pulled back.

Specifications (50/60Hz)

Max. discharge capacity 1.4 m3/min
Max. head 70/102 m
Main materials CFRETFE, PFA
Required power range 1.5 to 18.5 (60Hz) kW
Discharge bore 25 to 65 mm
Liquid temp. range ETFE: –20 to 100 C deg., PFA: –20 to 150 C deg.
Specific gravity limit Up to approx. 2.0 (Please contact us for details.)
Sealing method Seal-less construction

 

Other Magnetic Drive Pumps :

magnetic drive pumps

Process pumps

Self-priming pumps

Small size pumps

Direct drive pumps
MDE series
MDM series
MXM series
MDF-L series
AMP series
MX, MX-F series
MDH, MDH-F series 		SMX, SMX-F series MD series
MD-F series 		RD series