Product Detail:

Vaccum Induction Sintering Furnace

Product Detail:

DX Series Pressurized Vacuum Sintering Furnace

DX Series Pressurized Vacuum Sintering Furnace

DX Series Pressurized Vacuum Sintering Furnace

Product Introduction：

DX series vacuum furnace was developed for sintering high-performance rare earth permanent magnet material NdFeB. The increase of the ratio of L/W*H of work zone and microcomputer multipoint automatic temperature control achieve good temperature uniformity, and rapid air cooling system provides 360° uniform cooling airflow, and also can be used for material tempering, annealing and ageing process.


Configuration Option： 


1. Efficient vacuum dewaxing/degreasing device
2. Internal circulation or external circulation cooling system
3. Special material process can attach low temperature convection heating device
4. Low pressure control device meets the requirements (such as restraining the volatilization of alloying element) of special atmosphere process
5. High temperature metal (nickel-chromium, molybdenum, tungsten)/graphite material heating system selection facilitates the requirement of different temperature or material processes


Main Technical Parameters： 

Model
Effective heating zone
(W*H*L, mm)
Maximum temperature
(℃)
Final vacuum
(Pa)
Temperature uniformity
(℃)
Pressure rising rate
(Pa/h)
Heating power
(KVA)
Total charge
(Kg)
DXS-113
150*150*300
1300
2*10-3
±5
≤0.67
30
5
DXS-224
200*200*400
1300
2*10-3
±5
≤0.67
60
15
DXS-336
300*300*600
1300
2*10-3
±5
≤0.67
90
50
DXS-448
400*400*800
1300
2*10-3
±5
≤0.67
120
100
DXS-5510
500*500*1000
1300
2*10-3
±5
≤0.67
150
200
DXS-6612
600*600*1200
1300
2*10-3
±5
≤0.67
180
350
DXS-7714
700*700*1400
1300
2*10-3
±5
≤0.67
240
500
DXS-8816
800*800*1600
1300
2*10-3
±5
≤0.67
300
800